An ideal solution for the prevention of access to unauthorised areas such as staff or public car parks. Complete with locking facility this single gate gives the option to allow larger vehicles through when required. We strongly recommend latch back posts are used when the gates are left in the open position (See at extra cost: ‘Latch Back Post Purchase Option’)

This heavy-duty design is available from 3 to 6 metres and can be manufactured to suit specific size requirements. It is also manufactured with a height restriction of 2.1M and can be galvanised or powder coated. For any other height or advice please contact our specialist help line.

Available to be Surface Mounted or Concreted In the barrier uprights are manufactured from 100 X 100 X 3MM steel box section and can be surface mounted (bolt down) or sunken fixture (concrete in).

We also strongly recommend a nudge bar is selected with barrier, as this helps avoid any damage occurring to the barrier gates. However, the gates are replaceable if ever required.

Please note: Double finish (Galvanise and powder coat) may increase lead time up to 7 working days

To see the Double Leaf Variants, please see Picture Links at the bottom of this web page

BESPOKE SIZES Gates can be made to suit your road width. Please note our measurements are between the barrier uprights (see drawing) Choose the barrier gate width longer than your size (for a 5.6m barrier, choose 6m option etc.) Note ‘EXACT SIZE OF GATE REQUIRED ….’ in Special delivery instructions If bespoke size is not noted, the gate will be made to standard selected size