Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
You could have this delivered by Mon 11 Dec
Discounts only apply to multiples of the same product, and exclude accessories.
Product ID: 50236
Stair tread and Nosing covers are ideal for use in any area where frequent use or exposure to slippery environments increases the risk of accidents. The covers feature a durable gritted surface and a highly visible nosing to ensure years of safe and maintenance-free service. The covers also improve the appearance of chipped or damaged steps. They are perfect for use in commercial building applications where it is important to maintain an attractive appearance and a safe environment.
We recommend a double fixing method for installing Anti-Slip Stair Treads consisting of high-strength adhesive and mechanical fixings. As an approximate guide, 14 No. fixings should be sufficient to mechanically fix one 3000mm Anti-Slip Stair Nosing, which is approximately 6 No, fixings per 1 linear metre of stair nosing.
For adhesive, with a 6mm bead, 1 x 290 ml tube of adhesive sealant should be sufficient to bond 3.5 linear metres, which is approximately 85ml of adhesive per 1 linear metre of Anti-Slip Stair Tread - please note that the usage is entirely dependent on the method of application and the condition of substrate.
The BZP Silver Cutter Screws are suitable for screwing directly through the GRP and into a timber substrate. They are also self countersinking so will not leave any trip-hazards. If the substrate is concrete, you will need to drill and plug, and use a suitable screw for fixing. If the substrate is a grating, it is recommended to use a suitable bolt & washer & clip combination to secure.
This product comes with a 1 year warranty as standard