Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
You could have this delivered by Fri 22 Jul
Discounts only apply to multiples of the same product, and exclude accessories.
Pull up Weight - 8Kgs
Product ID: 4192
This product has achieved Secure by Design status. It’s a Stainless Steel telescopic retractable bollard, lockable with an integral cylinder lock which is located at ground level. It is a highly effective and robust way to protect against unwanted vehicle access to premises.
This Lift Assisted Telescopic Post is raised and lowered vertically and with the aid of a central gas strut has a lifting wieght much lower than conventional telescopic posts. It includes an integral 7-pin security lock located in the top of the post.
The security locking system has been developed to ensure the post will withstand a wide range of attacks. Ideal for protecting vehicle forecourts, commercial properties, car parks and domestic driveways.
** Installation & use ** It is recommended that posts are placed no further than 1,200mm apart to ensure no vehicle may pass between the raised posts. An excavated hole of approximately 1,400mm deep and 300mm diameter is required for installation. Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400mm must be concrete. The lid of the post should be no more than 10mm above finished ground level. Keep the sliding post clean and occasionally lubricate the lock with Ambersil 40+ or similar
"Service rating : Good Telephone responce
Product : Good product."