This Steel Constructed Combination Height Restrictor is an ideal solution to restrict access to high vehicles to unauthorised areas such as car parks and underground low level car parks.

Paired with the swing gate, this also enables users to block off access too all vehicles when required.

Strong and robust

This barrier is available in two designs. Single leaf 3-6 metres and double leaf for larger spans, 6-10 metres.

The single leaf design comes complete with a heavy duty, self-locking gate catch with padlock facility and the double leaf design is manufactured with a centrally positioned heavy duty, sliding latch.

Also with a padlock facility (padlock not supplied).

All options are supplied either powder coated, galvanised or double finish (Galvanised and Powder coated) please note double finish will increase lead time.

We recommend ALL barriers are concreted in

However, both sunken and surface mounted options are available (not for barriers over 8 metres)

As a safety feature, we strongly recommend that you purchase an additional latch post so you can securely lock the gate in the open position, to prevent the gate leaf swinging back into vehicles or pedestrians. Latch posts come with a heavy duty self locking gate catch, with padlock facility (padlock not supplied)

• Available in sizes from 3m - 10m
• Concrete in (Recommended) or Bolt Down Posts (Not available for barriers over 8 Metres)
• Powder Coated, Galvanised or Double Finish
• Latch Back Posts to lock the barrier in the open position are are HIGHLY RECOMMENDED and available at extra cost
• Nudge bars with Maximum Height Signage available as extra (Please note; this will increase the barrier height by 200mm, the nudge bar will hang at selected restricted height)

BESPOKE SIZES

Gates can be made to suit your road width. Please note our measurements are between the barrier uprights (see drawing) Choose the gate width longer than your size (for a 5.6m gate, choose 6m option etc.)

Note

EXACT SIZE OF GATE REQUIRED …..

In Special delivery instructions (If bespoke size is not noted) the gate will be made to standard selected size

• Hinge Post Manufactured From 100 x 100 x 5mm Box Section
• Latch Post/Latch Back Post Manufactured From 100 x 100 x 3mm Box Section
• Concrete in 1200mm below ground
• Bolt Holes are 16mm Dia (Fixings Not Supplied)
• Gates Manufactured from 50 x 50 x3mm Box Section
• Standard heights 1.9 , 2.0, 2.1, 2.2 & 2.3 Metres (Other heights available on request)
• Choice of finishes please select from options (Black, Yellow, Red and Galv)
• 180 Degree opening ,dependent on hinge position

• Warranty: This product comes with a 1 year warranty as standard