This Parking Post has been manufactured with wings, in order to alleviate parking between posts.

This parking post comes complete with an integral lock and two keys as standard. The lock is situated at the top of the post for ease of use and the construction is light and easy to handle.

This bolt down version is easy to install and provides you with a great deterrent.

The finish is powder coated a hi viz Yellow showing you have taken due care and attention to warn people you have a post in place.

Ideal for protecting your parking space or stopping people turning round in your driveway. If you are buying more than one post, we can offer locks that are keyed alike as an optional extra.

Please note these posts are not built to have car tyres rolling over the post its-self.

INSTALLATION INSTRUCTIONS

We recommend the following minimum safety precautions are taken during installation:

• Wear appropriate safety clothing.
• Eye protection and hand protection should be worn, including safety helmet.
• Wear strong protective gloves.
• Secure the site from pedestrians and vehicles, where applicable, by the use of high visibility tape, barriers, cones, safety lamps etc.
• If you use a power supply ensure that it is secure and in a safe dry location.
• Ensure there are no underground services that may be affected.
• A minimum of two personnel are recommended.

To install:

• Determine the position of the installation and ensure the surface is suitable – preferably concrete at least 250mm x 250mm x 150mm deep.
• Use the bolt holes in the flange plate for a template and drill holes for the bolts.
• Bolt the post/bollard into position with the under surface of the flange resting flat on the ground, making sure the bolts are securely tightened.
• The drilling hole depth and diameter will depend on the type of bolt being used. Fixing down bolts is available extra – type depends on ground conditions.
• If you have eyelets please ensure they are facing the desired orientation before the posts are fixed in position

MAINTENANCE

• Occasionally clean all surfaces with soap and water
• Check all fixing bolts and other visible fixings are suitably tight and have not worked loose.
• Check foundations remain firm.