An ideal solution for the prevention of access to unauthorised areas such as staff or public car parks. Complete with locking facility this single gate gives the option to allow larger vehicles through when required. We strongly recommend latch back posts are used when the gates are left in the open position (See at extra cost: ‘Latch Back Post Purchase Option’)

This heavy-duty design is available from 3 to 6 metres and can be manufactured to suit specific size requirements. It is also manufactured with a height restriction from 2.3m to 3.0m and can be galvanised or powder coated. For any other height or advice please contact our specialist help line.

Due to the height this barrier is only available for concreting in. The barrier uprights are manufactured from 100 X 100 X 5MM steel box section.

We strongly recommend signage is purchased with the barrier to advise the height restriction applied. We offer a nudge bar complete with max height signage, this option hangs below the barrier at your chosen height restriction (please see drawing for details) or a maximum height sign which can be fixed to the barrier gate.

Please note: Double finish (Galvanise and powder coat) may increase lead time up to 7 working days

To see the Double Leaf Variants, please see Picture Links at the bottom of this web page

BESPOKE SIZES Gates can be made to suit your road width. Please note our measurements are between the barrier uprights (see drawing) Choose the barrier gate width longer than your size (for a 5.6m barrier, choose 6m option etc.) Note ‘EXACT SIZE OF GATE REQUIRED ….’ in Special delivery instructions If bespoke size is not noted, the gate will be made to standard selected size