Sleek horizontal lines & uncompromised fully boarded privacy.

Part of the premium RMG002DG series, this fully boarded aluminium double driveway gate delivers a striking, contemporary aesthetic to any property boundary. Featuring a sleek flat top profile and a solid horizontal infill, it provides maximum privacy and a formidable physical barrier, combining sharp modern design with zero maintenance and long-lasting performance.

Key Features:

• Full Privacy: Solid, fully boarded horizontal infill provides complete privacy for your driveway and property.
• Durable Construction: High-strength aluminium ensures weather-resistant, long-lasting performance without warping or rotting.
• Automation Ready: Lightweight construction places less strain on hinges. Suitable for standard manual operation or for use with automated operators. Please note: These gates are not supplied automated. For automated scenarios, please contact our support team or consult a specialist fitter.
• Low Maintenance: No painting, staining, or oiling required. Simply wash with soapy water.
• Universal Orientation: Supplied fully assembled and can be installed to open inwards or outwards depending on your site setup.
• Colour Options: Available in Jet Black (RAL 9005) and Anthracite Grey (RAL 7016) textured powder-coated finishes.
• Peace of Mind: Backed by a 5-year manufacturer's warranty.
• Eco-Friendly Materials: Infinitely recyclable aluminium construction.

Included Hardware:

• 2 x Driveway Gate Leaves.
• 4 x Adjustable wall-mounted hinges.
• 2 x Floor-mounted hinges.

(Please note: Manual locks, handles, centre stops, drop bolts, and underground automation removal feet are available as optional upgrades using the dropdown menus above, allowing you to tailor the gates perfectly for either manual use or an automated system.)

Choose from an expanded range of standard sizes or opt for our custom width reduction service. See our "How to Choose the Right Gate Size" guide below.

How to Choose the Right Gate Size:

Step 1: Decide How You Want to Hang the Gates

• Between Existing Structures (Wall-to-Wall): Fit the gates directly between two existing walls or sturdy pillars.
• Wall and New Aluminium Post (100mm or 150mm): Attach a new post to a wall, and hang the gates between the wall and this post.
• Between Two New Posts: Install two new aluminium posts, and hang the gates between them.

Step 2: Measure the Opening Width & Height

• Measure the Narrowest Point: Always measure your physical opening width and height in millimetres at the absolute narrowest point of the brickwork or gap.
• Height Clearance: Ensure your total physical opening height is at least 50mm to 100mm taller than the gate height you select to allow for proper ground clearance and floor-mounted hinge operation.

Step 3: Account for Hinges, Centre Gap and Posts

• Standard Width Clearance: Allow an extra 50mm total width to accommodate the wall hinges and the necessary gap in the centre where the two gates meet.
• If using posts, deduct the specific width of your chosen posts (e.g., 100mm or 150mm) from the overall gap.
• If not using posts, no deduction is needed aside from the 40mm to 50mm hinge and centre clearance.

Step 4: Check Standard Gate Sizes

Check the dropdown menu to see if a standard size fits your opening exactly. If it does, no custom reduction is required.

Step 5: Calculate Custom Gate Size (If Needed)

If none of the standard sizes fit perfectly, calculate a custom size by taking your measured opening width, allowing 40mm to 50mm for the hinges and centre gap, deducting any post widths, and rounding your final calculated width up to the next available standard gate size.

Step 6: Select Gate Size, Customise & Final Checks

• If a standard size fits, simply select 'Standard Size' from the options.
• If you need a bespoke width, select the 'Bespoke Cut' option and enter your exact calculated width (in mm) into the Final Total Gate Width box before adding the item to your basket.

Installation Overview

Important Notification on Modifications, Returns & Delivery:

Please double-check your measurements carefully before completing your order. Modified bespoke sizes and custom colour orders are strictly non-returnable. Please note: Any orders submitted with a custom width entered in the text box, but purchased at the 'Standard Size' price, will be automatically placed on hold until the bespoke cutting fee is settled.

Estimated Lead Times:

• Standard Gate Orders: 2 to 3 weeks.
• Gates with Accessories: If you select optional accessories from the dropdown menu, such as the Locking Mechanism or Locinox Lockable Drop Bolt, please allow an additional 3 to 5 working days on top of the standard lead time to accommodate these items. Please note: During the garden summer peak season, this timeframe can be slightly longer.
• Custom Fabrication (4 to 5 weeks): Bespoke width reductions and/or the addition of Underground Automation Removal Feet require structural modifications. Selecting either or both of these options results in a total estimated lead time of 4 to 5 weeks. (These modifications are completed concurrently at the factory, meaning ordering both will not extend your wait beyond this 4 to 5-week window).

Please note that deliveries to Scotland may take longer.