Commanding Style & Enhanced Security.

The RMG008DG is a partial privacy, executive-style driveway gate. Featuring a vertical mixed infill, the solid lower two-thirds offer enhanced privacy, while the open vertical bars on the upper third allow visibility through the middle section of the gate. Finished with a stylish bell-curved top and a wider structural frame, it delivers a robust, commanding aesthetic that perfectly balances functionality with elegance while offering zero maintenance and long-lasting performance.

Key Features:

• Partial Privacy: Solid lower panels provide privacy, while the open upper third adds an elegant touch and visibility.
• Durable Construction: High-strength aluminium (3mm thickness) ensures weather-resistant, long-lasting performance without warping or rotting.
• Automation Ready: Lightweight construction places less strain on hinges. Suitable for standard manual operation or for use with automated operators. Please note: These gates are not supplied automated. For automated scenarios, please contact our support team or consult a specialist fitter.
• Low Maintenance: No painting, staining, or oiling required. Simply wash with soapy water.
• Universal Orientation: Supplied fully assembled and can be installed to open inwards or outwards depending on your site setup.
• Colour Finish: Available exclusively in a Jet Black (RAL 9005) powder-coated finish.
• Peace of Mind: Backed by a 5-year manufacturer's guarantee.
• Eco-Friendly Materials: Infinitely recyclable aluminium construction.

Included Hardware:

• 2 x Driveway Gate Leaves.
• 4 x Adjustable wall-mounted hinges.
• 2 x Floor-mounted hinges.

(Please note: Manual locks, handles, centre stops, drop bolts, and underground automation removal feet are available as optional upgrades using the dropdown menus above, allowing you to tailor the gates perfectly for either manual use or an automated system.)

Please review our "How to Choose the Right Gate Size" guide below to ensure you select the correct fixed dimensions for your opening.

How to Choose the Right Gate Size:

Step 1: Decide How You Want to Hang the Gates

• Between Existing Structures (Wall-to-Wall): Fit the gates directly between two existing walls or sturdy pillars.
• Wall and New Aluminium Post (150mm): Attach a new post to a wall, and hang the gates between the wall and this post.
• Between Two New Posts: Install two new aluminium posts, and hang the gates between them.

Step 2: Measure the Opening Width & Height

• Measure the Narrowest Point: Always measure your physical opening width and height in millimetres at the absolute narrowest point of the brickwork or gap.
• Height Clearance: Ensure your total physical opening height is at least 50mm to 100mm taller than the gate height you select to allow for proper ground clearance and floor-mounted hinge operation.

Step 3: Account for Hinges, Centre Gap and Posts

• Standard Width Clearance: Allow an extra 50mm total width to accommodate the wall hinges and the necessary gap in the centre where the two gates meet.
• If using posts, deduct the specific width of your chosen posts (e.g., 150mm) from the overall gap.
• If not using posts, no deduction is needed aside from the 50mm hinge and centre clearance.

Step 4: Check Standard Gate Sizes & Select

Check the dropdown menu to see which of our fixed standard sizes fits your calculated opening exactly. Please note: This executive gate model is only available in the listed standard sizes; we do not offer a custom width reduction service for this specific range. Once identified, simply select your required size from the options.

Installation Overview

Important Notification on Delivery & Sizing:

Please double-check your measurements carefully against the available dimension guides before completing your order. Because this is a fixed-size gate range, we cannot offer bespoke width reductions. Ensuring accurate opening measurements is crucial for a successful installation.

Estimated Lead Times:

• Standard Gate Orders: 2 to 3 weeks.
• Gates with Accessories: If you select optional accessories from the dropdown menu, such as the Locking Mechanism or Locinox Lockable Drop Bolt, please allow an additional 3 to 5 working days on top of the standard lead time to accommodate these items. Please note: During the garden summer peak season, this timeframe can be slightly longer.
• Custom Fabrication (4 to 5 weeks): The addition of Underground Automation Removal Feet requires structural modifications. Selecting this option results in a total estimated lead time of 4 to 5 weeks.

Please note that deliveries to Scotland may take longer.