These Speed reduction ramps have a higher profile designed to slow vehicular traffic to a lower speed (5mph), they are a reliable and effective way to regulate traffic speed near hazardous areas such as bends, exit-ways, and loading bays; weigh bridges, junctions, pedestrian crossings and schools, etc.

Suitable for car parks at hospitals, pubs, hotels, golf courses and on roads where speeding regularly occurs. Speed reduction ramps should be located at regular intervals to reduce overall speed.

• Reduces road speed immediately
• Contrasting colours and reflectors included
• Easily adjustable to ‘site’ conditions
• Durable rubber material ensures a extremely long service life
• Suitable for temporary as well as permanent traffic speed reduction
• Surface tread provides grip- even when wet
• Inbuilt directional tubular rods, which can also accommodate cables etc
• Special fixing bolts are included for secure fixing in concrete or tarmac

• End and centre sections have chamfered edges to protect cyclists and pedestrians

• Appropriate warning signs indicating the presence of speed reduction ramps should be used with this product

INSTALLATION INSTRUCTIONS

1. The width of the carriageway and the number of blocks required should first be ascertained.

2. The directional tubular rods (optional extra) should be adjusted for size accordingly and laid down in place. If required, adjustments should be made to take into account camber of the road surface.

3. The blocks can then be laid down end-to-end on the tubular rods and drilled through to the road surface.

4. Fit the bolts into the sections, insert into the drill holes and secure tightly.

Cable Protection Possibility below:

A cable of up to 30mm diameter can be fitted through the length of the ramp. To facilitate this the end caps would have to not fitted.