Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
You could have this delivered by Wed 13 Dec
Discounts only apply to multiples of the same product, and exclude accessories.
Fixing * M12 Rawl Bolt (6 required per Flow Plate)
Positioning of the plates should be such that vehicles should only approach the plates head on, and not at an angle. Suitable road signs should be erected to advise road users that plates are in use, advising of slow speed limit, maximum 5mph. Can be used in conjunction with Autopa Speed Ramps to achieve slow speed.
Good street illumination should be used to ensure good visibility. HGVs should not be permitted access over the plates. Road warning signs are available. 5mph maximum speed advised.
Product ID: 19305
Surface Mounted Flow Plates control traffic flow to one direction and are designed to work in groups to ensure full lane width coverage.
As a vehicle passes over the plate, the flap is pushed over allowing the vehicle to pass. Once the vehicle has passed the flap returns to its upright position.
The Surface Mounted Flow Plate is constructed from heavy duty steel which is then galvanised to ensure longevity and coated yellow to maximise visibility.
Not recommended for HGV use.
Recommended minimum vehicle clearance - 150mm
For safety reasons we recommend using speed ramps placed before the flow plates. To purchase suitable & recommended speed ramps please click: HERE