Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
You could have this delivered by Tue 31 May
Discounts only apply to multiples of the same product, and exclude accessories.
Centres to Prevent Vehicle Access - 1.2 to 1.3m
Lifting Weight - 5.5Kgs
Lifting Weight - 6.6Kgs
Lifting Weight- 9.3Kgs
Product ID: 5175
This product has achieved Secure by Design status. It’s a mild steel telescopic parking post lockable with an integral cylinder lock which is located at ground level. It is a highly effective and robust way to protect against unwanted vehicle access to premises.
It is raised and lowered vertically. The telescopic post with an integral 7-pin security lock located in the top of the post.
The security locking system has been developed to ensure the post will withstand a wide range of attacks. Ideal for protecting vehicle forecourts, commercial properties, car parks and domestic driveways.
Reflective Logo included
** Installation & use ** It is recommended that posts are placed no further than 1,200mm apart to ensure no vehicle may pass between the raised posts. An excavated hole of approximately 1,200mm deep and 300mm diameter is required for installation. Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400mm must be concrete. The lid of the post should be no more than 10mm above finished ground level. Keep the sliding post clean and occasionally lubricate the lock with Ambersil 40+ or similar.
This product comes with a 1 year warranty as standard