Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
You could have this delivered by Thu 07 Dec
Discounts only apply to multiples of the same product, and exclude accessories.
Centres to Prevent Vehicle Access - 1.2 to 1.3m
Wall Thickness - 3mm
Lifting Weight - 4Kgs (Height 500mm)
Lifting Weight - 6Kgs (Height 745mm)
Product ID: 4183
This Square post is a simple, cost efficient telescopic parking post which is lockable by padlock. It is a highly effective way to prevent unwanted vehicle access and deter ram raids.
The padlock is positioned at the base of the post, between the post and cover flap for added protection. The post is operated by lifting fully out of the ground and then rotating 45deg. The lug at the rear of the post aligns with the flap to allow the padlock to lock the post to the flap.
Excavate hole 1100mm deep and 300mm diameter. Install with chippings in bottom to allow drainage. Lid of post should be no more than10mm above ground level. Concrete should be used to cover the top 360mm of the hole around the post. Keep sliding post clean. Recommended centres for posts to prevent vehicle access is 1.2 - 1.3m
"Had one before which worked well"