Please make sure you have selected all the options needed below.
Please ensure you have chosen a quantity of at least 1 for the quantity required.
Product ID: 45550
Our British Manufactured Swing gate is a strong, robust, and durable design great for all access control requirements. Available in a choice of finishes and a range of colours this gate is perfect for car parks, entrances or anywhere similar.
The gate frame is manufactured from square mild steel hollow section and completed with strengthening insert sections for a heavier duty appeal. Our tapered design offers flexibility in all locations especially where there is a gradient at the installation location. All gates are supplied with heavy duty, galvanised adjustable eyebolts, enabling perfect adjustment during installation.
Single leaf gates are complete with a hinge post and latch post to secure your gate in the closed position. The latch post is manufactured with a heavy-duty self-locking gate catch with padlock facility, preventing gates from bouncing back out of the latch post. Lock shrouds are available as an optional cost to increase the security of your chosen padlock. Our shrouds are manufactured with heavy duty steel and fabricated around the locking facility to deter the use of tools around the padlock.
As a safety feature, we strongly recommend that you purchase an additional latch back post, so that you can securely lock the gate in its open position, to prevent the gate leaf or gate leaves swinging back into vehicles or pedestrians. This too is manufactured with a self-locking gate catch and padlock facility.
Sunken (concrete in) and surface mounted (bolt down) fixtures are available to suit all requirements however, we recommend concreting in for the most secure solution.
Hanging post 100mm box section.
Flanged or Ragged for Bolt Down or Concrete In.
Frame 50mm box section.
Catch Post 100mm box section, with Self Locking Catch and Padlock Facility
*Signage available as an optional extra.
Finish options are:
Power coated only - Normal lead time usually 7-10 working days
Galvanised only - Normal lead time usually 7 working days
Galvanised and Powder coated (Double Finish) - Normal lead time usually 7 to 14 working days
For Bespoke Sizes:
Gates can be made to suit your road width. Please note our measurements are between the barrier uprights (see drawing) Choose the gate width longer than your size (for a 5.6m gate, choose 6m option etc.) Note the ‘EXACT SIZE OF GATE REQUIRED …..’ the when in the Cart basket at ‘Checkout’ after ‘(1)Billing Details’ the box to input the exact size require will be in ‘(2) Delivery Details’ at the bottom after address & phone contact before ‘Continue to Payment’. If bespoke size is not noted, the gate will be made to standard selected size
"Good product and fit for purpose."