This excellent value manual raise Arm Barrier is assembled with quality stainless steel bearings & comes complete with a lockable end rest, padlock plus fixings.

It also has the facility to lock in the upright and down position. With its strong steel design, it is ideal for securing entrances and exits up to 8 metres wide for years to come.

• Boom Length available from 3-8m (booms 6.5m and upwards may come in two pieces).
• Strong Lightweight Aluminium Boom - Diameter 76mm.
• Complete with Full Stainless Steel Bearing Units.
• This barrier is Powder coated Red (RAL 3020) & comes with Red & White boom as standard, however a Yellow & Black boom is available as a no extra cost option, but do note the barrier will still be coloured in Red.
• Can be padlocked in the upright and down position.
• Bolt Down to concrete base (see installation instructions).
• Concrete in available at extra cost.
• Padlock & d-bolts supplied.
• Signage available at extra cost (Stop, No Entry or Exit).
• Skirt available only currently available at an additional cost on sizes 3 to 6.5 metre variations.
• Bolt down end rests, are lockable and have adjustable height from 650mm up to 1200mm

For alternative Heavy Duty Arm Barrier please click: HERE

Important Notifications about this barrier below:

• If you choose the Yellow & Black Boom colour combination the rest of the Arm barrier will be Red, as effectively this is the standard colour. Thus, the uprights, the end rest & the counterweight are all coloured in Red.
• Skirt option combinations are only currently available on sizes 3 to 6.5 metre variations.
• If a Double Barrier System is ordered, an additional Locking Sleeve is required, which is extra to order and pay for, which is available in accessories.
• Must always be locked when in the upright position to secure it in place.
• If a Pogo stick is chosen from the ‘Tip Support’ options, the barrier would not be able to be locked in the down position.
• Also if a barrier with a skirt is chosen, please do not select the Pogo Stick end rests in the Tip Support options.
• Is not suitable for marine environments.