Product Description

These Automatic Raise Arm Barriers are designed to offer long-term reliability, efficient operation and durability. Providing a smooth consistent operation (single phase supply).

Designed for use in residential & commercial applications, these barriers have the ultimate flexibility to suit your needs.

• Controlled by a a Programmable Logic Controller, which can be programmed to suit any requirement.
• 100% duty cycle
• Can be interfaced with unlimited access control options (See below)
• Removable cast aluminium hood
• Arm lengths up to 6.0 metres (plain pole)
• Single Phase 230V, 6amp supply, using inverter for 3 phase motor
• Motor & two stage gearbox direct drive
• Inverter driven
• Adjustable speed, acceleration and deceleration
• No springs required or counterweights
• Pre-wired loop detector bases for single channel safety and entry/exit control
• Heavy duty roller plunger limit switches
• Programmable Logic Control - c/w fault diagnostic on screen display
• Manual override in case of power failure
• Comes complete with M12 anchor shield bolts
• 1.5 Amp power supply for additional access control
• Full manufacturers support and service available on all products

ADDED BENEFITS

• Corporate colours available on request
• Low maintenance
• Ease of installation
• Heavy duty pillar block bearings

OPTIONAL EXTRAS

• Articulated Arm (Low Ceilings)
• Pogo tip support
• LED Boom lights
• Magnetic lock
• Lorry Height Stop/No Entry signs
• Sensing safety edges
• Folding Bottom Skirt up to 4.5m (sold by the metre)

OPTIONS FOR ACCESS CONTROL

• Keypad
• Proximity Cards
• Photo Cells
• Voice/Video Intercom Access
• Token Acceptors
• Remote Control Fobs
• Key Switch
• Loop Detectors

NOTES

Not suitable for marine environments

Pedestrian safety photo cells and magnetic arm locks require end rest

Listed installation prices are based on distance from B78 2EX

INSTALLATION AVAILABLE IF REQUIRED PLEASE ASK FOR A QUOTE SPECIFIC TO YOUR NEEDS

ALL COMPONENTS AND ACCESSORIES LISTED ON THIS PAGE MUST BE ORDERED AT THE TIME OF THE MAIN BARRIER. FOR SPARES AND REPLACEMENTS PLEASE SEE SPARE POLES & SPARE PARTS & ACCESSORIES

Warranty Information

This product comes with a 1 year warranty as standard

Technical Information

Specifications

• Maximum Boom Length - 6.0 Metres
• Opening / Closing Time - 2.0 - 6.0 Seconds (Adjustable)
• Drive Unit - 3 Phase Motor & Wormed Gearbox
• Power Supply - SINGLE Phase 230v 50Hz 6.0Amps
• Finish - Aluminium and Lid Powder Coated
• Accessories - Pre-wired loop detector bases
• Springs / Counter Weights - NOT REQUIRED
• Cycles - 100% Continuos Duty Cycle Rating
• Control Panel - TELEMECHANIQUE PLC & INVERTER
• Boom Diameter - 86mm x 60mm Oval
• Auxiliary Power - 1.2Amp 24v Supply
• Dimensions - 436mm x 433mm x 1135mm
• Ambient Humidity - -10 ~ 60 Degrees Centigrade
• Control Panel IP Rating - IP65
• Fixings - M12 Anchor Shield Bolts Included
• Settings - Programable Configuration as standard

GSM Intercom Stainless Steel Vandal Resistant (1 Button) Automatically calls up to 3 numbers in sequence (if not answered) 100 authorised phone numbers (when called from authorised number, gate/barrier is opened and call dropped, so no air time cost) SIM CARD TO BE SUPPLIED BY OTHERS

Product Documents

• Drawing
• Drawing with Skirt
• Barrier Specifications
• Pole Arm Adaptor Identification Sheet (Please use when ordering replacements)
• Automatic Barrier Handing Form

Information about installation

www.barriersdirect.co.uk/info/installation

Up to date dispatch information

www.barriersdirect.co.uk/order_checks/new