Automatic Sliding Gate

BSEN 12435 compliant, automatic sliding gates. Where the use of conventional swinging gates are not feasible due to space restrictions, this automatic cantilevered sliding gate is an easy to install, ideal solution.

From one of the UK's leading manufacturers and installers of high quality manual and automatic sliding gates, manufactured in-house to your individual requirements ensuring the highest level of quality and customer satisfaction. We offer a bespoke service from design to manufacture where we can supply a custom built gate to match existing fencing/surroundings ensuring that the finished product is exactly what is required.

The standard round tube infill can be replaced by a variety of infill options including D or W profile palisade pales, timber panels, solid sheeting and various mesh panels to integrate perfectly with all fence types.

This automatic cantilever gate has a manual release mechanism concealed within the lockable housing unit, allowing manual control of the gate in the event of a power failure.To aid in the safety aspect of the automatic cantilevered sliding gate, the portal is fitted with dual-height photo cells and rubber profile safety edges.

The gate is operated by a programmable logic controller, operated via an inverter, which allows for programming of various parameters such as gate speed, passage timeout, automatic opening times, free exit loop operating times etc.Proximity sensors mounted in the main portal read the moving gate leaf, indicating the start and end of the travel cycle.Towards the back of the gate's opening area, a floor mounted support roller supports the weight of the gate in the fully open position.Anti-climb spikes are optional for gates over 1500mm high.

CONTACT US IF YOU NEED INSTALLATION ON THIS PRODUCT 0800 0288010

Specifications

• The gate will be delivered as a complete unit and lowered on to pre-installed concrete plinths.
• Specification:
• CE Approved
• Dimensions:
• 250mm x 225mm extruded aluminium beam infill – 30mm diameter x 6mm wall thickness
• Power requirement:
• N/a
• Drive motor:
• N/a
• Maximum span:
• 10 metres drive through (14 metres overall)
• Maximum height:
• 3.0 metres (maximum width 6.0 metres)
• Duty cycle:
• N/a
• Operation time:
• N/a
• Finish:
• Steel Components:
• Shot Blasted
• Zinc Phosphate immersion coated
• Zinc Primer
• 2K PU Finish
• Aluminium Components:
• Abraded
• 2K PU Finish

Warranty Information

Product Documents

• Data Sheet
• Sliding Gate CAD Drawing 3m x 2.4m
• Plinth Dimensions CAD Drawing 3.2m x 2.4m
• Sliding Gate CAD Drawing 7.5m x 2.4m
• Plinth Dimensions CAD Drawing 7.5m x 2.4m