5 Bike Wall Rack

SUMMARY

A simple efficient method of safely parking bicycles, so simple it actually encourages orderly cycle parking. Easy to use – the front wheel being wheeled into the holder until gripped between holder arms. No metal part of the cycle should contact the holder as only the tyer is gripped. Over 40 years pedigree, robust, reliable, long lasting. All galvanising is to BS EN ISO 1461. All items made from steel tube, bar & plate.

Complete fabricated units, for single or double level parking, are also available for any required number of bicycles.

For bolting to a suitable wall, normally of brick. As individual Model ‘R’s but 5 holders are mounted on a top and bottom rail of galvanised angle iron. Supplied in one section exclusive of bolts. 6 qty 12mm bolts required.

For bolting to a suitable wall, normally of brick. As individual Model ‘R’s but 5 holders are mounted on a top and bottom rail of galvanised angle iron. Supplied in one section exclusive of bolts. 6 qty 12mm bolts required.

SPECIFICATION

Of mild steel tube, bar and plate, galvanised. Holders are positioned at centres of 610mm. Overall length of rail is 2500mm. Fixing holes at 1170mm centres. 6 bolts are required per rack of 5 holders. Bolts extra. Angle iron of 50 x 50mm galvanised. Weight: 1 .9kg per individual model ‘R’ holder 20kg per rack of 5 holders Caps on holders & racks are normally of toughened black polypropylene.

SUV Bike Rack Holdeer

SU(V)

SUMMARY

For two bicycles. Ground fixed, either with ragged end for casting in or flanged end for bolting on to surface.

SU(V) ragged..........................138200007 SU(V) flanged..........................138200049 No. of bolts required (12mm) = 3 per flanged holder. SPECIFICATION

Flange diameter 134mm, 6mm thick. Of mild steel, square section, bar and whiteheart iron flange, galvanised. Weight: 5.5kg. Cap of black polypropylene.

Bike Stand - Anti Rust coating

SUMMARY

For one bicycle. Ground fixed, either with ragged end for casting in or flanged end for bolting on to surface.

SR(V) ragged............................138200004 SR(V) flanged............................138200005 No. of bolts required (12mm) = 3 per flanged holder (available extra). SPECIFICATION

Of mild steel tube, bar and whiteheart iron flange, galvanised.Weight: 3.0kg. Flange diameter 134mm, 6mm thick. Cap is black polypropylene.

INSTALLATION

Ragged end for casting in to ground with suitable concrete foundation of 300mm cube size approx. Ragged end depth to be 203mm below ground. Flanged end for bolting on to existing good concrete. Centre of holder should be approx. 345mm above ground level.

Wall Mounted Bike Stand 90 & 45 Degrees

Wall mounted bike holders ca be sppled individually for fixing to any convenient wall, post or rail For single or double parking (Double level parking reqires BC ramps)

Specification

• Made from galvanised steel tube bar & plate
• Wall mounted with brackets for 10mm bolts (avail extra)
• Available in two fixing settings 90 degrees or 45 degrees
• 2no bolts required per holder,
• 1.9kgs per individual holder * BC Ramps
• Made from galvanised steel plate
• Allowing centres not less than 305mm with 90Degree option and 380mm with 45 degree option
• When used with 45 degree holders itis necessary to indicate whether left hand orrightscew is required

INSTALLATION

For fixing to a suitable brick or concrete wall, or timber with suitable bolts. Centre of holders should be approx 345mm above ground level. Position of bolt holes should be marked – then drill in to suit type of bolt being used. Holders positioned in a row should be at 610mm centres.

JS21 Cable Lock & Wall Bracket

Features:-

• Secure valuables in second by passing the 10mm x 1.8 cable through the item and wall bracket.
• 1.8 metres length.
• Can be used to secure Jet Ski to trailer by threading through mooring eye and wrapping around the trailer chassis.
• Weight 4.61kg.

MC30 High Security Chain, Padlock & Ground Anchor

Features:-

• 1.5m long grade 30 short link chain, includes chain, padlock, ground anchor & security fasteners.
• 10mm diameter high security chain & stainless steel hardened padlock 1.5 metres long.
• Chain is british made from special alloy steel which allows it to be case hardened a depth of 40 thou this is far superior to many chains on the market and is highly recommended to the more security minded.
• Most chains on the market are only mild steel and when case hardened become brittle and can easily be cropped.
• Covered in high visible red sheathing.
• Stainless steel padlock complete with 2 keys
• Ideal for security Quad Bikes, Motorbikes and Ride On Lawn Mowers.
• Weight 4.4kg.

The Bike Dock

Added Security

The Bike Dock stores bikes upright and improves bicycle visibility. It's strong struts and stainless steel locking loop

allow cyclists to secure any part of their bikes to it.

Simply roll your bicycle up the struts, dock your bike in place and apply your chain/D-lock to any part of your bike on to the strut and locking loop.

Space Saving

As more people take to cycling, you may find you need more bike parking space. The Bike Dock we have designed stores 8 bikes upright, resting on their back wheels.

This is approximately 30% more space efficient than horizontal parking.

The Bike Dock Carousel

We also offer the Bike Dock with an optional 360º rotating carousel. This reduces bike entry space needed thus making the Bike Dock approximately 50% more space efficient than horizontal parking. This is the most space efficient option. Complete with safety feature to prevent quick rotation.

The Bike Dock is made from Recycled Steel Recycled Steel

40% of the Bike Dock is manufactured from recycled steel.

Roof

An optional roof not only ensures dry saddles, but offers broad advertising opportunities for an organisation seeking advert exposure.

London Stand - Black & yellow with cycle parking badges

Bold, tough and practical. The London stand is available in 50mm o/d mild steel tube or recycled steel, hot dip galvanized and polyester powder coated for an extremely durable combination. Comes complete with steel cycle parking badges and reflective tape. To be concreted in.

Sheffield Cycle Stand

This tubular cycle stand allows the bike's frame to be secured by the user's own lock.

This practical and durable design is recommended by national cycling associations.

H 800mm, L 680mm, D 48.2mm, Thickness 3mm, Weight 8kg

A cost effective best seller.

Fixing bolts: 4 required per cycle stand (purchase separately) (Not required for concrete in stands)

Tall Stand- Stainess steel

This innovative tall and narrow stand deters youths from sitting and congregating around it. The Tall Stand has parking badges and reflective bands to aid the visually impaired. To concrete in.

Hybrid (Crossbar) Sheffield Stand

We offer the Hybrid stand in recycled, mild, BDS . A reinforced crossbar makes the Hybrid Stand extremely durable to withstand the wear and tear from bikes rubbing against it. It also enables both children and adults to lock their bikes against it. Available in galvanized or powder coated colour finish.

Stainless Steel Stand

The classic high quality finish, made from the finest Marine Grade 316 stainless steel, 50mm o/d, in a satin polished finish, which is highly resistant to corrosion. To Concrete in.

Recycled Cycle Stand!

The recycled stand is the first of its kind, manufactured from recycled steel. Our recycled steel products reflect very favourably upon organisations' environmental policies and on top of this they encourage the local community to start cycling, reducing carbon emissions greatly.

Comes in two type of fixing either flanged or ragged.

TROMBONE BIKE STAND

Brand new bike stand Thicker and higher than your avaerage bike stand, galvanised as standard to protect against corrosion.

Steel tube 60mm diam height above ground 900mm width 625mm finsh galvanised or Galvanised and painted

Colours Green Black, Grey & Blue

Root Fixed to be concreted into the ground

Pillar Bike Racks

A sturdy value for money rack that grips the wheels. Bikes cab be stored at two levels with wheel ramps to the upper level. Available in single or double sided units

• Tough welded construction
• Made from tubular steel
• Simply bolts to the floor
• Powder coated dark grey

Specification

Single Sided

• 4 Bikes Height 690, Width 1450, Depth 985
• 6 Bikes Height 690, Width 2330, Depth 985

Double Sided

• 8 Bikes Height 690, Width 1450, Depth 1840
• 12 Bikes Height 690, Width 2330, Depth 1840

Cost Saver Wall Mounted Bike Racks

These cost effective cycle racks for one bike are with a choice of 90 degree and 60 degree angle to the wall.

• Minimalist designs
• Fully welded construction
• Constructed from mild steel
• Powder coated exterior grade black

• Choice of 90 or 60 degree angle

• Cost Saver Bike Rack Scroll Design 90 degree 1 bike wall mounted 400x100x260

• Cost Saver Bike Rack Scroll Design 60 degree 1 bike wall mounted 400x100x260

Wall Mounted Bike Stand

• Wall mounted brackets with wheel locators that can be adjusted up to 180°.
• Wall mounting plate secured with dowels. Compact and flexible design.

Suitable for all bicycles up to a tyre width of 50 mm. Swivels up to 180°, easily adjustable and delivered as fully assembled unit ready for immediate use.

Spec: 355mm high x 285mm deep x 90mm wide

Bike Wall or Ground Anchor

"Deters the most determined thief"

• Unique smart design - single bolt fixing.
• Lays Flat to the wall/floor when not in use.
• Just lock your bike to anchor (chain not included).
• Virtually indestructible.
• Fast DIY installation.
• British design (patent GB2394482B).
• Vigorously tested by experts to resist attack.
• Includes fitting kit - only needs a hammer drill to install.
• for bikes, mowers etc withstands over 3 tonnes of force.

Traffic-Line Compact Bike Stand

Bicycle rack manufactured in hot-dip galvanised steel, with round tube wheel locators. Designed for medium duty (e.g. company bicycle parks, small housing estates, private houses etc).

Excellent value for money.

General design with 4 or 5 parking places. Suitable for all types of bicycles (including mountain bikes with max. tyre width of 1550mm). Can be accessed from either side, dependent on location. Supplied as fully assembled unit ready for immediate use.

• 4 Bike - Spec 255mm high x 385mm deep x 1,210mm wide
• 5 Bike - Spec 255mm high x 385mm deep x 1.320mm wide

Eco 3 Space Bike Stand

* Consistantly one of our best selling bike racks.*

Suitable for all kinds of environments, Home and personal use, schools, churches and offices of all kinds. Provides extra piece of mind for those wanting a secure rack to lock their bikes to.

Made of galvanised steel tubing, usable on both sides and by all types of bicycles, including mountain bikes. Free standing or anchored to the ground, drilled with 13 diam holes on side irons.

• Length 792mm
• Height 218mm
• Width 515mm
• Tube 38mm diam

Eco 5 Space Bike Stand

Made of galvanised steel tubing, usable on both sides and by all types of bicycles, including mountain bikes. Free standing or anchored to the ground, drilled with 13 diam holes on side irons.

• Length 1500mm
• Height 218mm
• Width 515mm
• Tube 38mm diam

Yellow Peril Bike Rack

Grab one while you can this strong resilient bike rack comes in two sizes for 3 or 5 bikes Great for that extra security needed.

The SB.15L Lightweight Cycle Stand is manufactured from light weight tube and box section. Designed for easy installation and relocation, can be wall mounted as well as being floor mounted. Suitable for all types of bicycles, access can be gained from both sides of rack, depending on location. Finish with durable easy clean powder coated finish Supplied fully assembled and comes in 3 and 5 space versions.

• 3 Bike - 285mm high x 340mm deep x 700mm wide

• 5 Bike - 285mm high x 340mm deep x 1320mm wide

Heavy Duty Floor Mounted Bike Stand

Ideal for Schools or councils where bike usage is high and rough! Thee racks have been best sellers for the past 5 and come in sizes hold 3 to 12 bikes (Pictures show 10 bike holder). Made of Mild steel box section 3m angle 5m. They are all galvanised to guard against rust.

• Higher level holder maximum height 686mm
• Lower level holder maximum height 463mm
• Fully galvanised
• 3 Bike holder length 1220mm
• 4 Bike holder length 1525mm
• 5 Bike holder length 1830mm
• 6 Bike holder length 2135mm
• 7 Bike holder length 2440mm
• 8 Bike holder length 2745mm
• 9 Bike holder length 3050mm
• Floor Mounted Spec. Please note: The spec shows a sunken type but we only do surface mounted.

Product Documents

• Specification Drawing

45 Degree angle bike stand 4 hoop for 8 bikes

Spec: 49mm x 3mm tube. Overall height is 780mm width from outer leg to outer leg is 680mm. 750mm between hoops. Hoops fixed to 50mm x 25mm.

S type bike stand

Offers greater support when propping up the bicycle, meaning that bikes don’t fall over. This stand also allows the bike to be locked from various positions such as handle bars and main frame.

Hot dip galvanised to BS EN ISO 1461:1999.

1700mm Length. 280mm Depth. 800mm above ground height.

Powder coated or Galvanised

Trimdon Bike Stand

A good space saver, easy to install. Offer support to the front wheels of the bicycle. This product is recommended for short term bicycle parking.

Galvanised or powder coated Hot dip galvanised to BS EN ISO 1461:1999.

The 6-space bicycle stand (low-high)

Made of galvanised or painted steel. 6 racks, 3 high and 3 low, allows for optimum use of space, access from both sides. Excellent wheel grip. Stable: may be used freestanding or anchored to the ground, drilled with holes: Ø 10. Bolts not supplied.

Specification

Length 2000mm Top height 390mm Bottom Height 164mm Width 550mm

Product Documents

• Specification

Robust Bike Rack

Capacity 2 to 6 bicycles.

Robust bicycle rack manufactured in hot-dip galvanised steel, with round tube wheel locators.

Capacity 2 to 6 bicycles, compact design with wheel racks at two levels. Suitable for mountain bikes (to max. tyre width of 55 mm). Can be accessed from either side, dependant on location.

Supplied as self-assembly kit, includes all fixtures and instructions.

• Width: 2 bikes 700mm
• 3 bikes 1050mm
• 4 bikes 1400mm
• 5 bikes 1750mm
• 6 bikes 2100mm

Cost Saver Floor Mounted Bike Racks

These cost effective cycle racks for 1 or two bikes are for floor mounting

• Constructed from mild steel

• Powder coated exterior grade black

• Cost Saver Floor Mounted Bike Rack - 1 bike floor standing 560x310x120

• Cost Saver Floor Mounted Bike Rack - 2 bike floor standing 560x560x120

Concrete Bike Stand

Monoscape concrete cycle parking is manufactured from high quality aggregates. Cycle blocks are available in River Gravel finish with steel clip for locking bike to.

• Height 400mm
• Width 305mm
• Weight 65kgs

* For additional information see attached specification *

Product Documents

• Specification

Hooped Bike Stand Galvanised

Galvanised steel with black cast aluminium Mercure black top. To be concreted directly into the ground.

• Width 1200mm
• Height above ground 700mm
• Tube 76mm
• Tube 50mm
• Depth in ground 400mm
• Hooped Stand Spec

Duo Bicycle Stand

A stylish stand for 2 bikes, holding the wheel firmly in place. The bike frame can be easily locked to the stand. Choice of 4 top caps City, Agora, Sphere and Europe.

Galvanised, painted in our ral numbers - Blue Grey Black Green

To be concreted directly into the ground.

Specification

Length 1520mm Height 750mm

Underground 250mm

Product Documents

• Specification

Modular Bike Rack

A very efficient solution at an affordable price. Can be added to in slot together units to accommodate requirements.

• Structure made in 35mm diam, stand in 16mm steel tubes
• Space of 50mm between the hoops to hold all bikes, including mountain bikes
• Free standing or anchored to the ground, drilled with holes 13mm diam (bolts not supplied)
• Additional 2 space modules can be added as required
• Finish Galvanised.

Specification

• 3 Space module length 786mm
• 2 Space extension length 734mm

Decorative Motorcycle & Bicycle Stand

The solution for orderly and secure bike or motorbike parking.

This stand offers the perfect parking facility for bicycles, scooters and motorbikes.

Steel tube76mm diam and 60mm diameter Finish: Galvanised with black lacquered aluminium top cap To be concreted into the ground

Specification Length 1184mm Width 450mm Height 900mm above ground, 400mm below ground

TRAFFIC-LINE “Sheffield“ style Bicycle Racks

Manufactured in mild steel continuous tube. Available in Sub-surface and surface mounted versions.

This popular style bicycle rack provides an economic, durable and effective solution to bicycle parking.

• 48mm Ø x 2.5mm gauge steel tube • Size above surface 750mmW x 800mmH • Surface fixing ground plates 70mm x 160mm x 5mm

Finish: Hot dip galvanised.

Fixing: Surface fixing (4 bolts). Sub-surface fixing to depth 300mm.

Bike Loops

Straight forward and simple, the design is rider friendly, easy to use and also encourages controlled and efficient cycle storage.

Each loop can hold two bikes and comes Surface mounted with an option of three paint finishes. Blue, Green and Light Grey.

• Dimensions: H 805 x W 470.

Looped Bike Rack

Excellent for use as a free standing rack or in Cycle shelter

• Made from tubular steel
• Simply bolts to the floor
• Fully welded, no assembly required
• Powder coated Blue, Green or Light Grey

Specification

• 4 bikes h812 x w930 x d470
• 6 bikes h812 x w1710 x d470

Decorative Modular Bike Stand

• Single sided or double sided
• Comes in a choice of colours and Top Caps
• Secures all types of bikes including mountain bikes
• Made of steel posts 76 diam and hoops 22 diam Distance between hoops 50mm
• Base plates and anchoring rods supplied
• 6 space single side length 2152mm

• 3 space single side length 1015mm

• Modular Bike Stand Spec

Mercure Bike Stand Single and Double Sided

Single or double sided. Galvanised steel tube and black painted cast iron caps. Tyre width 50mm. Base plates and anchoring rods supplied.

• 3 space width 1015mm
• 6 space width 2152mm

Toast Rack Bike Stand

Made of mild steel tube of o.d. 48mm, wall thickness 3.25mm. Height (above ground) 750mm. Length 800mm overall. Three 12mm bolts required per flange (6 per stand). Stands are welded on to a 50mm square section base.

• Made of mild steel tube of o.d. 48mm, wall thickness 3.25mm.
• Height (above ground) 750mm.
• Length 800mm overall.
• Three 12mm bolts required per flange (6 per stand).
• Stands are welded on to a 50mm square section base.
• Installation Instructions

TRAFFIC-LINE Bicycle Racks with safety hoop

TRAFFIC-LINE Bicycle Rack with safety hoops Versions for 2, 4 or 6 bicycles

Strong bicycle rack manufactured in Hot-dip galvanised steel, with additional safety support hoops.

Offers greater protection against theft and reduces risk of potential damage to the bicycle by vandalism (bent wheel rims, etc.) Safety hoops can be supplied with red protective sleeves to prevent damage from impact. (At extra cost.) Caters also for mountain bikes (to max tyre width 55mm). Supplied as a self-assembly kit, including all fixtures and instructions.

• Dimension for 2 Cycles L 700mm x W 940mm x H 850mm
• Dimension for 4 Cycles L 1.4mtr x W 940mm x H 850mm
• Dimension for 6 Cycles L 2.1mtr x W 940mm x H 850mm

Compact design due to the arrangement of arches at two levels.

Claw Bike Stand

A really useful stand alone twin-level bike rack for up to 12 bikes. Ideal for Shopping Centres, parks, clubs and open spaces.

• Made from tubular steel
• Simply bolts to the floor
• Fully welded, no assembly required
• Powder coated dark grey

Specification

• 4 bikes h670 x w1444 x d790
• 6 bikes h670 x w1664 x d790
• 8 bikes h670 x w2324 x d790

Traditional Bike Stand

A sturdy twin level rack designed to fit in a traditional bike shelter. Up to 8 bikes can be stores by bars that grip the bike wheels.

• Made from tubular steel
• Simply bolts to the floor
• Fully welded, no assembly required
• Powder coated dark grey

Specification

• 6 Bikes h935 x w1752 x d597
• 8 Bikes h935 x w2352 x d597

16-space bicycle stand

A cycle holder that accommodates 16 cycles: 2 rows of 8 bicycles facing each other. Galvanised steel, side panels painted green with bicycle motif in white. Base plates with hole :Ø 13, (bolts not supplied). Easy and quick to install.

Specification

Length 2514mm Height 855mm Width 620mm

Product Documents

• Specification

Round - a - Tree/Post Bike Racks

These innovative cycle racks permit the creation of bike parking areas in unusual places, such as round a tree or pole. The larger racks are circular, while the smaller ones are square. Both are supplied in 2 halves for easy assembly.

• Available in different sizes to provide parking for up to 24 bikes.
• All racks mount to the ground not the tree
• Easy access for cyclists from all directions
• Can also be fitted around poles, bollards and posts
• Welded construction, made in two halves with simple self assembly instructions
• Constructed from mild steel, powder coated exterior grade black

Round-a-tree Bike Rack for 4 Bikes 580 x 590 x 590

Round-a-tree Bike Rack for 8 Bikes 580 x 1080 x 1080

Round-a-tree Bike Rack for 12 Bikes 600 x 2300 x 2300

Twin level Round-a-tree Bike Rack for 24 Bikes 750 x 3120 x 3120

Character Bike Racks

Add some character to your cycle parking with this attractive bike stand. Each rack provides safe parking for cycles as it allows the cycle frame and wheel to be padlocked through the rack.

• A bike stand for 1 or 2 bikes
• Made from tough 8mm thick steel powder coated black for scratch and weather resistance

Squirrel

• Size 1020mm high by 845mm wide

Crank

• Size 1115mm high by 860mm wide

Dolphins

• Size 1115mm high by 845mm wide

Rocket

• Size 1190mm high by 855mm wide

Chipmunk

• Size 1300mm high by 840mm wide

Cog

• Size 1295mm high by 845mm wide

• All supplied with 4 fixing bolts

Scooter Rack

In response to the number for school children who travel to school via scooter we have a rack designed for younger children to keep their scooters safe and secure.

The racks are all steel welded 50mm diam tube powder coated Scooters are supported via a 6mm tick plate and secured with a half inch diameter steel pin, drilled at one end to accept a padlock and attached to the rack with a heavy duty chain (padlocks not included).

UE/SSR/10 Single Sided Scooter Rack: Capacity 10 scooters Fixing Base plate fixed Length 2.0m Height 800mm

UE/DSR/10 Double Sided Scooter Rack: Capacity 10 scooters Fixing Base plate fixed Length 1.1m Height 800mm

UE/DSR/20 Double Sided Scooter Rack: Capacity 20 scooters Fixing Base plate fixed Length 2.0m Height 800mm

Powder Coated option available

Counter sunk Sheffield Plus:

Sheffield Plus with spigots and centre bar. Powder coated or galvanised Spec: 49mm x 3mm tube. Overall height is 1030mm width from outer leg to outer leg is 680mm. Allow for 250mm for buried depth giving a top bar height of 780mm

Steel Sheffield Cycle Stand.

For a smart solution to your bike rack needs. This Steel version of the Sheffield Cycle stand should suit your requirements. Concretes into the ground for extra security. It is offered in grade 316l Brushed Satin Stainless Steel, Galvanised or Black powder coated.

• 750mm wide
• 750mm tall
• 48.3 diam
• Weight 11Kgs

Telescopic Ground Anchor

• 100mm Square construction
• 4mm Gauge Steel
• Retractable Handle for easy operation
• Submerged depth 305mm
• Extends to 165mm
• Weighs 8.5Kgs
• Through Hole to Attach High security chains sold separately.
• Comes with kick plate

Vertical Bike Wall Hoop

For space saving bike storage indoors, here is a range of vertical bike racks. They have an innovative and patented mounting hoop that secures the bike in a vertical position. This saves 35-45%of the floor space required if bikes are stored horizontally and avoids the common problem of bikes leaning against one another.

• Simple cost effective means of storing one bike vertically
• Patented hoop mechanism holds bike securely in place
• Clothes hook and chain included (padlock not included)
• Simple Self assembly required
• Saves Floor Space
• Supplied with wall fixings

Single Sided Vertical Bike Rack

For space saving bike storage indoors, here is a range of vertical bike racks. They have an innovative and patented mounting hoop that secures the bike in a vertical position. This saves 35-45%of the floor space required if bikes are stored horizontally and avoids the common problem of bikes leaning against one another.

• Simple cost effective means of storing one bike vertically
• Patented hoop mechanism holds bike securely in place
• Ramp to ensure rear mudguard does not touch ground
• Simple Self assembly required
• Saves Floor Space
• Supplied with raw bolts to fix to ground

Double Sided Vertical Bike Rack

For space saving bike storage indoors, here is a range of vertical bike racks. They have an innovative and patented mounting hoop that secures the bike in a vertical position. This saves 35-45%of the floor space required if bikes are stored horizontally and avoids the common problem of bikes leaning against one another.

• Simple cost effective means of storing one bike vertically
• Patented hoop mechanism holds bike securely in place
• Ramp to ensure rear mudguard does not touch ground
• Simple Self assembly required
• Saves Floor Space
• Supplied with raw bolts to fix to ground

Hanging Bike Rack

Incorporates the patented PARC-VELO cycle holder (PV) An original system for parking bicycles safely and securely by use of a high grade steel security cable. Each bicycle rests on a PARC-VELO holder on its handlebars, and the cable can be wound through both wheels and the frame, locking by the users own padlock, D-lock etc. Allows variable spacing between bikes should the customer desire. Supplied for site fixing and assembly to suit the required number of bicycles – based on up/down 2 level parking with holders at 380mm centres.

Horizontal bar 48mm diameter, 1100mm above ground. Legs of 80mm square section mild steel, 3.6mm thick. Flanges 180x150mm, 6mm thick. Wall fixing option is available. PARC-VELO holders of cast aluminium, powder coated blue as standard. Security cable is PVC sheathed, diameter 10mm high grade steel, coloured black. Steel components galvanised. Caps of black PVC. Allen key provided for security screws.

Specification:

PV4:

• Ragged 138200204 Flanged 138200217
• for 4 bikes
• 1600 overall length
• 380mm centres
• 2 legs
• 50

PV6:

• Ragged 138200206 Flanged 138200219
• for 6 bikes
• 2360 overall length
• 380mm centres
• 2 legs
• 55

PV8:

• Ragged 138200208 Flanged 138200222
• for 8 bikes
• 3120 overall length
• 380mm centres
• 2 legs
• 60

Outdoor Vertical Bike Locker

Vertical bike lockers are a revolutionary new way of storing bikes securely. They come with an innovative patented mounting hoop that allows the bike to be parked upright. As the bike is vertical, 35-45% of floor space is saved compared with horizontal cycle storage.

Bike lockers provide space and security not only for your bike, but for your cycle clothing, helmet and luggage as well.

• Innovative space-saving design that stores the bike space on its back wheel
• Fitted with patented mounting hoop that uses gravity to hold the bike upright
• Completely encloses the bike protecting it from thieves, vandals, the weather and bird strikes
• Manufactured to the Quality Cycle Locker Standard devised by the Bike Parking and Security Association (BPSA) to meet planning application requirements
• Constructed from heavy duty galvanised steel, powder coated green.
• Comes complete with disc padlock and three 10mm bolts for floor mounting into concrete
• Space to store a helmet and cycle gear inside.

Motor Cycle Security Barrier

SUMMARY

A strong mild steel barrier for securing motorcycles.

SPECIFICATION

• Made of 76mm diameter tube.
• The legs and lower horizontal bar have a loose steel bar inserted to prevent cutting and hacksawing.
• 1000mm above ground (300mm below).
• Mild steel tube, galvanised finish as standard.
• Colour coated finishes available on request.

Bike Rack Floor Mounted A

SPECIFICATIONS

Self supporting double sided rack with ramps for close parking centres.

• A double sided rack.
• Type A rack for 16 bikes will fit under one T20 double sided cycle shelter.
• Made from galvanised steel tube, section, bar & plate.
• For bolting down only.
• 8 qty 10mm bolts required for ramp ends.
• Can be made to accommodate any quantities of bikes.
• All racks are made to order.
• Weight = average 5.5kg per holder i.e. rack of 10 = 55kg

Bike Rack Floor Mounted B

PECIFICATIONS

Self supporting single sided rack with ramps for close parking centres.

• A single sided rack, parking centres of 305mm.
• Type B rack for 10 bikes will fit under one AX1, AX4 or AX3 cycle shelter.
• Made from galvanised steel tube, section, bar & plate.
• Available ragged or flanged.
• Can be made to accommodate any quantities of bikes.
• All racks are made to order.
• Weight = average 5.5kg per holder i.e. rack for 10 = 55kg

Bike Rack Flor Mounted C

SPECIFICATIONS

Double sided rack

• A double sided rack with parking centres of 610mm..
• Available with 90 or 45 degree setting.
• Made from galvanised steel tube, section, bar & plate.
• Available ragged or flanged.
• Can be made to accommodate any quantities of bikes.
• All racks are made to order.
• Weight = average 4kg per holder i.e. rack of 5 = 20kg.

Bike Rack Floor Mounted D

SPECIFICATIONS

Single sided rack

• A single sided rack with parking centres of 610mm..
• Available with 90 or 45 degree setting.
• Made from galvanised steel tube, section, bar & plate.
• Available ragged or flanged.
• Can be made to accommodate any quantities of bikes.
• All racks are made to order.
• Weight = average 4kg per holder i.e. rack of 5 = 20kg.

Bike rack Floor Mounted E

SPECIFICATIONS

Double sided rack

• A Double sided rack with close parking centres of 305mm..
• A type E for 20 bikes will fit under an AX4 double sided shelter.
• Made from galvanised steel tube, section, bar & plate.
• Available ragged or flanged.
• Can be made to accommodate any quantities of bikes.
• All racks are made to order.
• Weight = average 5.5kg per holder i.e. rack of 10 = 55kg

Wall mounted Sheffield

SUMMARY

For bolting to a suitable brick or concrete wall by using 10mm bolts (extra). Single unit 1060mm centres, multiple unit 2840m long and extendable by interlink piece 750mm long so can be made to any length (supplied in sections, bolts are available extra).

Single unit 1060mm long.

SPECIFICATION

Made of 48mm od galvanised mild steel. Colour coated options are available extra. Flange diameter 134mm. 3 no. 12mm bolts required per flange (available extra).

INSTALLATION

Position rail in required location, ensuring height and accessibility is suitable for your application. Mark out drill holes. Drill to suit bolt type and then bolt rail into position.

Motor bike Loop

SUMMARY

For securing motor cycles, the users lock their motor cycle to the loop using their own chain or cable. Cast in option available for external locations or where ground conditions allow excavation to a depth of around 400mm. A bolt down option is also available for locations where there is a suitable surface to bolt down on to. Can be used internally or externally. SPECIFICATION

• Cast in or bolt down options available.
• Loop diameter approx 20mm solid steel.
• The bolt down version is particularly useful where installation depth is restricted.
• Lid of ragged version: 6.25mm thick
• Body: 4.0mm thick
• 4 x high security shear nuts & bolts included with bolt down version.

Vertical Cycle Holder

SUMMARY

Ideal for indoor use where space is at a premium and where security is not an issue. Easily fixed to a suitable wall. Can be fixed at any height to suit small or large bicycles. End hook has a plastic sleeve to avoid scratching or damage to wheels. The hook is designed to fit between the spokes so as not to put undue pressure on them. For bolting to the wall only (bolts are available extra). N.B The user must bear the whole weight of the bike when lifting.

SPECIFICATION

Mild steel tube, bar and plate, galvanised. 130mm x 514mm x 160mm. Weight: 1 .42kg. Normal height for adult bikes is 1750mm to the hook. For installation 4 plugs & screws are required,

Frankton Cycle Stand

SUMMARY

This is a Sheffield style variant. The stand will accommodate up to two bikes (one each side). The variants like the Model n and Toastracks offer higher security cycle storgae, the user can lock the wheel and frame to the stand using their own D-lock or chain etc.

SPECIFICATION

• Available ragged for casting in to the ground or flanged for bolting down.
• 48mm overall diamter.
• Wall thickness 3.25mm.
• Ragged versions 300mm below ground.
• Flanged versions require 3no 12mm bolts per flange (6 per stand).
• Height above ground 750mm
• Length Overall 750m INSTALLATION

Mild steel and stainless steel flanged versions, a suitable surface, preferably concrete should already exist for drilling into and bolting down. For ragged ends a concrete foundation approx. 300mm cube is recommended, depending on ground conditions.

When positioned adjacent to one another stands should be around 800mm apart and around 450mm from any wall or other obstruction.

• Bolts are available extra.
• Mild steel galvanised to BS EN ISO 1461 (1999).
• Stainless steel is grade 304 as standard, grade 316 is available to order.
• Other colours available.

Rugby Bike Stand

SUMMARY

This is a Sheffield style variant. The stand will accommodate up to two bikes (one each side). The variants like the Model n and Toastracks offer higher security cycle storgae, the user can lock the wheel and frame to the stand using their own D-lock or chain etc.

SPECIFICATION

• Available ragged for casting in to the ground or flanged for bolting down.
• 48mm overall diamter.
• Wall thickness 3.25mm.
• Ragged versions 300mm below ground.
• Flanged versions require 3no 12mm bolts per flange (6 per stand).
• Height above ground 760mm
• Length Overall 700mm
• Legs 350mm centres P section height 319mm INSTALLATION

Mild steel and stainless steel flanged versions, a suitable surface, preferably concrete should already exist for drilling into and bolting down. For ragged ends a concrete foundation approx. 300mm cube is recommended, depending on ground conditions.

When positioned adjacent to one another stands should be around 800mm apart and around 450mm from any wall or other obstruction.

• Bolts are available extra.
• Mild steel galvanised to BS EN ISO 1461 (1999).
• Stainless steel is grade 304 as standard, grade 316 is available to order.
• Other colours available.

Hilmorton Cycle Stand

SUMMARY

This is a Sheffield style variant. The stand will accommodate up to two bikes (one each side). The variants like the Model n and Toastracks offer higher security cycle storgae, the user can lock the wheel and frame to the stand using their own D-lock or chain etc.

SPECIFICATION

• Available ragged for casting in to the ground or flanged for bolting down.
• 48mm overall diamter.
• Wall thickness 3.25mm.
• Ragged versions 300mm below ground.
• Flanged versions require 3no 12mm bolts per flange (6 per stand).
• Height above ground 750mm
• Length Overall 800mm

INSTALLATION

Mild steel and stainless steel flanged versions, a suitable surface, preferably concrete should already exist for drilling into and bolting down. For ragged ends a concrete foundation approx. 300mm cube is recommended, depending on ground conditions.

When positioned adjacent to one another stands should be around 800mm apart and around 450mm from any wall or other obstruction.

• Bolts are available extra.
• Mild steel galvanised to BS EN ISO 1461 (1999).
• Stainless steel is grade 304 as standard, grade 316 is available to order.
• Other colours available.

Bilton Cycle Stand

SUMMARY

This is a Sheffield style variant. The stand will accommodate up to two bikes (one each side). The variants like the Model n and Toastracks offer higher security cycle storgae, the user can lock the wheel and frame to the stand using their own D-lock or chain etc.

SPECIFICATION

• Available ragged for casting in to the ground or flanged for bolting down.
• 48mm overall diamter.
• Wall thickness 3.25mm.
• Ragged versions 300mm below ground.
• Flanged versions require 3no 12mm bolts per flange (6 per stand).
• Height above ground 750mm
• Length Overall 750mm

INSTALLATION

Mild steel and stainless steel flanged versions, a suitable surface, preferably concrete should already exist for drilling into and bolting down. For ragged ends a concrete foundation approx. 300mm cube is recommended, depending on ground conditions.

When positioned adjacent to one another stands should be around 800mm apart and around 450mm from any wall or other obstruction.

• Bolts are available extra.
• Mild steel galvanised to BS EN ISO 1461 (1999).
• Stainless steel is grade 304 as standard, grade 316 is available to order.
• Other colours available.