Pavement Railings

Ideal for around your perimeters and the edge of pavement, this barrier provides a cost efficient solution to you delineation problems. Comes in a choice of 2 lengths 1000mm (7 bars) 2000mm (13 bars)s all galvanised as standard to protect against corrosion, but are also offered in Black or Grey powder coating if required.

• Frame 35mm diam steel tube
• Vertical bars 16mm diam steel tubes
• Two widths 1000mm (7 bars) and 2000mm (13 bars)
• Finish: Galvanised or Galvanised and painted in grey or black
• To be concreted into the ground
• Height 924mm above ground below ground 376mm

Lisbon Railing

Solid steel handrail. Perfectly integrating in all locations whilst remaining a continuous line.

Zinc plated steel painted in grey or black Available in two lengths 1000 and 1500mm.

LOCKBLOC socket system for removable railings allows access to authorised vehicle or emergency services (fire brigade etc) 2 required per railing

The LOCKBLOC, thanks to its unique locking system is secure and tamper proof. Locks and unlocks with a 11 mm triangle key. The central boss is flush with the ground Galvanised with a lacquered finish. 100% Galvanised internal mechanism for complete corrosion protection. Drains naturally through sub surface gravel Lock is protected by a black lacquered flap.

Province Access Gate and Guard Rail

Allows occasional access to authorised vehicles or emergency services while ensuring continuity of style.

Pivots on the internal tube. Using a bolt and padlock, can be locked in the open or closed position. 2 stops per gate supplied (to concrete into the ground). Available as left or right opening.

Zinc-plated steel, painted in our choice of RAL colurs, with choice of cap tops or galvanised finish with the Mercure black top cap.

Guard Rails Available in two sizes Width 1072 or width 1572

Steel Hoop Barrier With Cross Bar

Steel hoop barrier with crossbar ideal for perimeters or can be used for trolley bays

• Steel tube 60mm diam
• Steel reinforcing bar 60mm diam
• Height above ground 1000mm below ground 300mm
• Length 1500mm
• Finish:galvanised or Galvanised and painted grey or black
• To be concreted into the ground

Stainless Steel Railing System

Attractive railings for all applications where visual impression is a priority. Tubular posts and cross rails 60 mm ø. Brackets, caps and linkages coated Blue to RAL 5017. These railings are simply outstanding. Ideal for combining with our stainless steel bollards.

Sub Surface and surface fixings available

2 meter railing

• Sub Surface 60/1.33mm (330mm below ground) Lateral Rail approx 2 meters
• 2 x Posts
• 2 x Lateral rails

1.5 meter railing

• Sub Surface 60/1.33mm (330mm below ground) Lateral Rail approx 1.5 meters
• 2 x Posts
• 2 x Lateral rails

1 meter railing

• Sub Surface 60/1.33mm (330mm below ground) Lateral Rail approx 1.5 meters
• 2 x Posts
• 2 x Lateral rails

Extension Units

• 1 x Post
• 2 x Lateral rails

Guardrail / Handrail

The system is designed for use where a simple physical barrier is required for segregation, access prevention, guarding machinery or equipment or for fall and edge hazard protection. With a height complying with BS6180 the Guardrail system is ideal for use where handrails are needed. Lightweight and durable, system assemby is easily achieved without the use of nuts, bolts, brackets or welding providing smooth surfaced, snag free system without sharp edges or projections.

Ideal for situation where handrails are required. BS6180 Height Compliant, Suitable for industrial and commercial sites and premises. Supplied with post floor fixings compatible with installation on differing surfaces.

• High visability, hazard warning colour compatible
• Internal or external use
• Long life time
• Strong and durable
• No brackets or welding needed for assembly
• Low maintenance
• No rusting or rotting
• No painting

Specification

• Rails are supplied in sets of 2
• The standard rail set is 1500mm
• All post sections are 90x90
• Rail sections are 75 x 50mm
• Height 1160 to top
• Height to top of rail 1100mm
• Extension Unit - 1 mid post assembly, standard rail set.

Product Documents

A-Fax Pedestrian Barrier

Pedestrian Barrier is suitable for use in many different applications on industrial and commercial premises and sites. Pedestrian walkways, car parks and loading bays are some typical examples but it may be used in any situation where 'asset' protection or segregation is required. Double swing action gates compatible with the pedestrian barrier system are available on request.

Trio Barrier Railing

Its Contemporary design enhances modern architecture. The Trio railing offers maximum safety protection. The mesh is laser cut from 3mm sheet steel ensuring maximum strength.

Zinc plated steel painted in grey or black Aluminum top cap. Length 1572mm.

• Upright posts 76 diam
• Diagonal post 50 diam
• Overall height 1180
• Meets Council requirements.

Steel Hoop Guards

Steel hoop guards for the protection of an segregation of vulnerable zones. For internal and external use. Versatile, suitable for the protection of pedestrian areas (entrances, doors, entry gates) and machinery, the fencing off of danger areas in factories, and the segregation of vehicular traffic from pedestrian walkways, etc.

• Height: 1.000 mm
• Length: 1.000, 1.500 or 2.000 mm.
• Tube: 48 mm ø; wall thickness 2 mm.

Surface finish:

• For external use: Hot-dip galvanised and plastic-coated.
• For internal use: Powder-coated.

Bent steel tube with additional reinforcing crossbar. Finished in signal yellow with black stripes. For surface mounting with heavy duty base plates (70/60/10 mm) drilled for fixing bolts. 4 bolts included.

Standard Security Barrier

Workplace safety barriers Specially designed for protecting staff from machinery in the workshop.

50mm diameter steel tube standard barrier with optional reinforcement bar and protective panel Finish painted in yellow with self adhesive black strips (directive EC 92/58) Aluminium base plates

Chichester Stainless Steel Hoops

Suitable for all environments and extremely versatile. Use as a design feature in squares, plazas and pedestrian areas. Segregate cars etc. from pedestrian areas. Also suitable to act as bicycle stands.

Manufactured in strong stainless steel tubing 60mm diameter for long service life. Clearly visible due to their height above ground level of 700mm or 1,000mm.

Height above ground: 700mm and 1,000mm. Widths: 1,000, 1,5000 and 2,000mm.

With or without cross rail

Installation: For embedding in concrete (400mm sub-surface) or surface-mounting.

Angled Corner Safety Barrier

Angled corner safety barrier Ideal to protect the corners of buildings from accidental vehicle damage

• Steel tube 60mm diameter
• Finish Galvanised
• To be concreted in
• Height 1300mm
• Each angle width 800mm

Standard Fixed Foot Crowd Barriers - Great Value

Metal pedestrian safety barriers ideal for city center works, events and shows. Clip together for safety

Specification

• Fixed Foot Pedestrian Barrier – 2.5 Metres Long x 1.1m high

BEST BULK PRICE £41.16 PER UNIT

Anti Climb Fencing Panels

Temporary mesh and steel hoarding panels to secure site compounds and pedestrian work areas. Both of which are compatible with the Rhino barrier/panel system.

Anti Climb Fencing Panels with Rubber Block & Double Couplers

• Anti-climb mesh panels, 3.5m long x 2m high
• Includes rubber blocks (1 required per panel) and couplers (2 required per panel)

Screen Guard

A hoarding panel for use around worksites and compounds where privacy and security is required. 2.4 metre height. (ground fixers and stabilisers may be required for additional stability).