Domed Top Recycled Bollard (3 Grooves) Fixed & Removable

Ecologically sound & environmentally friendly conservation for the future - Now!

SUMMARY

Suitable for Pedestrianisation schemes, traffic calming, highways and pavements, estates, car parks, pubs, hotels, leisure, industry, commerce, public and private sectors. These are fixed bollards with ground fixing spikes for casting in to the ground; some are also available in removable versions with a galvanised ground socket and pin for padlock fixing (padlocks available separately). Flap closes flush with ground when the bollard is removed.

SPECIFICATION

• 100% recycled mixed consumer plastic waste.
• Durable, extremely long life time.
• High impact strength, but flexible and malleable.
• Solid construction.
• Not brittle and does not rot.
• Impervious to rain and frost.
• No rust, no corrosion.
• Chemically inert, Difficult to combust
• Vandal & graffiti resistant
• U.V. stable. Can again be recycled
• COST EFFECTIVE.
• Available ragged for casting in or removable with ground socket
• Height above ground 1000mm
• Depth below ground 400mm
• Diameter 150mm
• Weight 22 kgs
• Eyelets and chains available at extra cost. Eyelets will be screwed into the post under the grooves not welded.Chain comes galvanised as standard.

INSTALLATION

Fixed versions to be cast preferably in to concrete, to the respective depth below ground, as shown in table, as a minimum guideline. Excavated holes should be approximately 300mm square. Smaller items can have smaller foundations, but the existing ground conditions should always be taken in to account by the installer.

Warranty Information