Your Order:
No items
·
RetractaPost-GL' Lift Assist'
Free Delivery to UK Mainland
Now In Stock
10 – 15 working days
Buy more save more - prices as low as £517.42!
Product codes
- 138130450
- 138130450PC
- 138130459
- 138130460
- 138130460PC
- 138130469
- 138130470
- 138130470PC
- 138130479
View full size product images by clicking on the thumbnails above.
The RetractaPost-GL is available with internal gas strut as a lift assist to the heavier posts. This allows the user to lift an otherwise heavy bollard with minimal effort and reducing the risk of injury.
The actual lifting weight of the bollards is reduced between 70-80% dependent upon the bollard. Not only is the lifting weight reduced, but also the system acts as a control when the bollard is being lowered into the ground.
SPECIFICATION
- Made from mild steel round tube.
- Galvanised finish is standard.
- Colour coated finishes available extra.
- Lockable in the up position.
- 7 pin anti drill centre push lock.
- Supplied with 2 keys.
- Available randomly or identically keyed.
- Available in Stainless steel grade 304, brushed finish.
- Includes sprung flap cover to protect the lock.
- All galvanised RetractaPosts are supplied with reflective tape.
RetractaPost-GL Lift Assist 114 Diam Galvanised
- Height above ground 900mm
- Below ground 1251mm
- Diameter 114mm
- Wall thickness 8mm
- Gross weight 53kgs
- Pull up weight 4 kgs
RetractaPost-GL Lift Assist 114 Diam Stainless Steel
- Height above ground 900mm
- Below ground 1251mm
- Diameter 114mm
- Wall thickness 5mm
- Gross weight 48kgs
- Pull up weight 3 kgs
RetractaPost-GL Lift Assist 139 Diam Galvanised
- Height above ground 900mm
- Below ground 1251mm
- Diameter 139mm
- Wall thickness 8mm
- Gross weight 56kgs
- Pull up weight 6 kgs
RetractaPost-GL Lift Assist 139 Diam Stainless Steel
- Height above ground 900mm
- Below ground 1251mm
- Diameter 139mm
- Wall thickness 5mm
- Gross weight 50kgs
- Pull up weight 4 kgs
RetractaPost-GL Lift Assist 139 Diam Galvanised
- Height above ground 900mm
- Below ground 1251mm
- Diameter 139mm
- Wall thickness 8mm
- Gross weight 56kgs
- Pull up weight 6 kgs
RetractaPost-GL Lift Assist 139 Diam Stainless Steel
- Height above ground 900mm
- Below ground 1251mm
- Diameter 139mm
- Wall thickness 5mm
- Gross weight 50kgs
- Pull up weight 4 kgs
INSTALLATION
Full instructions are supplied with each post. Excavated hole 1300mm deep and 500mm diameter. Install with chippings in the bottom to allow drainage. Lid of post should be no more than 10mm above ground level. Concrete should be used to cover the top 360mm of the hole around the post. Keep sliding post clean and occasionally lubricate lock with Ambersil 40+.
Warranty Information
This product comes with a 1 year warranty as standardYOU MAY ALSO BE INTERESTED IN
ATG Lift Assisted Telescopic Posts
The lift assist mechanism reduces the product lifting weights by between 70% and 85%, this reacts...
only £ 632 .25
Semi Automatic Retractable Cast Iron Bollard
Semi-automatic retractable cast iron bollard. Single piece units made in 12-15mm cast iron weigh...
only £ 1,600 .83
YOUR RECENTLY VIEWED PRODUCTS
Removable Post (Integral Ground Lock or Integral Top Lock)
New removable posts, include an integral lock instead of a padlock. These posts are suitable for ...
only £ 231 .74
Removable -Bibury Street Bollards
Bibury ornamental bollards are styled on traditional and yet timeless lines, which enables them t...
only £ 376 .15
on