Swing Opening Height Restrictor - Galvanised

SUMMARY

An ideal solution for the prevention of access to unauthorised areas such as staff or public car parks. Height Restrictors are designed to restrict access to high sided vehicles such as HGV's and caravans. Swing height restrictors can be used where occasional entrance by high sided vehicles may be required for deliveries or refuse collections etc.

SPECIFICATION

• Galvanised steel main post construction 90 x 90 x 3mm (fixed).
• Base 400 x 400 x 10mm thick. 120 x 120 x 5mm for swing main post.
• Swing boom catch post 90 x 50 x 3.6mm thick. Base 340 x 254 x 10mm thick. 2.05m ±70mm standard clearance to knocking arm.
• All fabrication of galvanised steel construction.
• Finish painted red with white class 2 reflective tape.
• 4 qty 16mm bolts required for each leg.
• Swing boom lockable by padlock (available extra).
• Additional catch post available for occasional access by high sided vehicles.
• Additional catch post will be required if swing boom is to be locked in the open position.
• Up to 6m post centres Also available with ragged end for casting into ground.
• Road warning signs are available

Measurements from flange to front end of boom

PLEASE NOTE ;-One of the legs of the barriers is classed as a catch post as shown in drawing

INSTALLATION

Recommended concrete foundation 600x600x500mm deep minimum for main post. Catch post foundation 300mm cube. Requires 4 quantity 16mm bolts for leg. main base size 400x400x10mm steel 4 quantity 12mm bolts required for catch post.

Warranty Information