AUTOMATIC RAISE ARM BARRIER

These Automatic Raise Arm Barriers are designed to offer long-term reliability, efficient operation and durability. Providing a smooth consistent operation (single phase supply). They are controlled by a a Programmable Logic Controller, which can be programmed to suit any requirement.100% duty cycle.

Whether your application is residential or commercial, we can provide a barrier has the ultimate flexibility to suit your needs. The design is the result of years of experience, taking the latest technology and coupling it with tried and tested methods. The result, a superior product giving long service life and peace of mind.

PLEASE CALL OUR TECHNICAL HELPLINE ON 0800 0288010 FOR ADVICE ON YOUR REQUIREMENTS IN THIS SPECIALIST AREA

The barrier system can be interfaced with unlimited access control options (available to choose) such as proximity cards, remote control, vehicle identification tags, keypads, token or coin machines or can be integrated with your existing security systems.

INSTALLATION AVAILABLE IF REQUIRED PLEASE CHECK OUT PRICE UNDER TECHNICAL INFORMATION.

If you require installation the banding is arranged by the distance our installation team has to travel from postcode B782EX to your required site, please see technical information for more details.

Specification

• CE Approved (Conforms to BS6571)
• Boom Length 3-9 meters
• Colour - Red & White or Yellow & Black
• Boom Diameter - 76mm or 100mm
• Opening/closing time - 2.0 - 10.0 seconds
• Power Supply - Single Phase 230v, 50Hz, 6 Amps
• Finish - Polyester Powder Coated
• Cycles - 100% Continuous Duty Rating

Advantages

• Removable fiberglass hood (No rusting)
• Safety door switch (isolates power for protection)
• Door mounted control panel (for ease of access and adjustment)
• Inverter driven (Smooth operation)
• No Springs required (no balancing or adjustment necessary)
• Motor and gear box direct drive (no pulleys or belts required)
• Pre-wired loop detector bases for single channel safety and entry/exit control to be cut into ground then tarmac or concrete in
• Safety Close Auto reverse loop included for extra safety
• Programmable logic control (c/w fault diagnostic on screen display)
• Adjustable acceleration and deceleration
• Manual override (in case of power failure)
• Comes with ground fixings
• 1.5 Amp power supply (for access control)

Added Benefits

• Next day delivery on spares
• Low maintenance
• Ease of installation
• Bottom skirts available on PF6000S in the 4.5m pole arm only, PF6000 Lux up to 6m and PF6000HD up to 8M
• Top and bottom skirt only available on the PF6000LUX pole arm 5m and PF6000HD pole arm 6.5m
• PF6000 Lux 6.1m to 7m has an upgraded gear box

Not suitable for marine environments

Please note pedestrian safety photo cells and magnetic arm locks require end rest

Specifications

• Full manufacturers support and service available on all products

Warranty Information

Product Documents

• Specification
• Manual
• CAD Drawing
• Spec Sheet